HBOT Clinic Requirements: UK Training, WSE & Equipment

HBOT clinic requirements
Planning to add HBOT to a UK clinic? Understand operator training, CPD certificates, PSSR and WSE duties, equipment conformity and servicing.

If you’re researching HBOT clinic requirements, start by separating three different things: training the people who operate the chamber, managing the pressure system safely, and checking the conformity documentation for the equipment.

A CPD course, a Written Scheme of Examination (WSE) and a UKCA or CE mark serve different purposes. One does not replace the others.

1. Decide what service your clinic will provide

Before choosing a chamber, be clear about the service you intend to offer, who will operate it and who your customers will be. Consider the room, access for delivery, ventilation, staffing, insurance and how you will handle appointments and routine checks.

Clinics offering medical services should also make sure their professional governance, patient procedures and communications are appropriate to the service they provide. This article is a practical starting point, not a complete compliance checklist for every clinic.

2. Train operators for their role and equipment

Anyone operating, maintaining, installing or inspecting pressure equipment needs training appropriate to their role. HSE guidance includes training as one of the user’s responsibilities under pressure-system safety rules. Refresher training should also be considered. See the HSE guide to using pressure systems.

The Oxygens HBOT course is CPD-approved and provides a certificate of completion. It gives learners structured HBOT education, but it is not a licence to operate every chamber and does not replace the equipment-specific handover and operating instruction for the model installed at the clinic.

See the Oxygens HBOT course for course details.

3. Hbot Clinic Requirements and PSSR, WSE.

The Pressure Systems Safety Regulations 2000 (PSSR) cover pressure systems used at work that contain relevant fluids, including compressed air above 0.5 bar gauge. Whether and how PSSR applies depends on the equipment and installation.

For a qualifying system, a suitable WSE must be in place before operation, and the required examination must be completed. The user of hired or leased equipment should check that the WSE and current examination certificate are available. The competent person sets the nature and frequency of examination in the scheme, so an annual interval should not be assumed for every chamber.

Read the HSE overview of PSSR and its guidance on written schemes of examination.

A WSE is not the same as a routine service. The scheme sets out examination requirements for the pressure system; regular maintenance and servicing remain separate responsibilities.

4. Ask the supplier about equipment conformity documents

PE(S)R concerns the design, manufacture and conformity assessment of pressure equipment and assemblies being placed on the market. The manufacturer is responsible for classifying the equipment and following the conformity-assessment procedure that applies.

For equipment supplied in Great Britain, the relevant marking may be UKCA or CE, depending on the conformity route and circumstances. Ask the supplier for the applicable declaration, instructions and supporting conformity information for the particular equipment. Don’t assume that a WSE proves product conformity, or that a course certificate does either.

See the HSE guidance on Pressure Equipment (Safety) Regulations and the GOV.UK guidance for Great Britain.

5. Plan maintenance, records and day-to-day operation

Before opening, decide who will keep the chamber’s service and examination records, who checks the equipment before use, and how staff report faults. Follow the manufacturer’s operating instructions and arrange maintenance suitable for the equipment and how heavily it is used.

If you need support with installation, servicing, a WSE or a UKCA/CE readiness assessment, see Hyperbaric Services’ inspection and compliance services.

Clinic start-up checklist

Before offering sessions, check that you have:

  • A clear service plan and suitable premises
  • Operators trained for their responsibilities and the installed chamber
  • Equipment operating instructions and safe operating limits
  • Checked whether PSSR applies and, where required, a suitable WSE and current examination
  • Confirmed the applicable equipment conformity documents with the supplier
  • A maintenance plan and a system for keeping service and examination records
  • Written operating, cleaning and emergency procedures appropriate to your setup

Planning a clinic or adding HBOT to an existing service? Start with the Oxygens CPD-approved course, then discuss chamber selection, installation and ongoing engineering support with the relevant supplier and service providers.